Join
thousands of satisfied customers!
Grind all these points with OPTIMA!
Easy
setup and operation.
With its clearly marked and easily operated adjustments, unskilled personnel
will be able to grind drills repeatedly, perfectly and quickly to geometrical
specifications suiting your requirements, with a minimum of instruction.
Also
Available
• Rebuilding Service
• On-Site Training
• Loaner machine for rent during rebuild. |
 |
Specifications
Only the OPTIMA has a range from .0135" to 1.000" diameter. It will
grind right and left hand drills, high speed steel and carbide tipped or solid
carbide drills, spade drills, countersinks, center drills of all types, two
and three fluted drills and end mills (three fluted optional), taper shank
drills no. 2 and 3, slow or fast spiral. Up to 3/4" diameter any length,
standard length above 3/4" diameter.
Point
angle: 70° to 145° and 145° to 180° (different
setting)
Primary cutting angle: 0° to 40°
Secondary clearance angle: 0° to 40°
Net weight approx.: 120 lbs.
Overall dimensions: 19.7 x 17.7 x 17.7"
Motor: 0.33 HP, 2800 rpm, 115V, single phase,
60 Hz
Point thinning wheel: 6800 rpm
