 |
 |
CUTTERMASTER
DRILL GRINDERS
KEEPS
YOU RUNNING
WITH THE CUTTING EDGE
|
The
drill sharpener that you've been asking for is here —
Sharpens all standard and s-point drills from 1.5 mm (1/16") to 26 mm
(1").
- Accurately
sharpens and splits the point from one setup in less
than 2 minutes.
- Extremely
versatile — point angles and clearance angles
can be easily adjusted as needed - unlike the "pencil
sharpener" type drill sharpeners which relay
on the wheel angle.
- One
super-precise European-made 6 jaw drill chuck
holds the complete range — no need for extra
chucks.
- Sharpens
all point angles from 90 to 180 degrees.
- OSG
type and other special points can be ground, by using
a diamond file to blend the radius.
- Sharpens
2, 3, 4 flute drills.
- Thru
hole in the back of the chucks allows for any length
or shank type of drill
- The
wheel can be dressed with the fixture by tilting the
head perpendicular to the table and feeding across
the wheel with a diamond.
- Attachment
can be purchased separately, of packaged with the CutterMaster
machine.
- Precision-made
in the United Kingdom by a world-leading drill grinder
manufacturer with more than 50 years of experience,
exclusively for the Cuttermaster.
|
GS-11
Twist Drill Re-Sharpening Machine
|
For 2mm - 13mm Twist Drill
Re-Sharpening, Angle 90 degree - 140 degree
Pecise Grinding Results , Precision
Assurance ithin .02mm
Easy to Operate , grinding a drill within 10
seconds.
Special Design High Accuracy Alloy Steel
Collets
Accurate Grinding consumption 0.2mm
High Eficiency DC motor
Stable Quality GE Diamond Dust Grinding
Wheel
Considerable Design, Invisible Tool Box,
Delicate & Friendly Use
Portable Design with only weight 8 kgs
| Specifications: |
| Drill Diameter |
Ø 2
- 3 mm |
| Point Angle |
90° - 140° |
| Grinding Wheel |
CBN#200 |
| Motor |
110 V, 50 - 60 cy, 220 V option |
| Revolutions |
5300 min |
| Net Weight |
8 kg (17.6 lbs.) |
| Type of Thinning |
X Thinning |
| Standard Accessories |
Collet Holder X 12 pcs
Collet X 1 Set
Metal Shim 0.1mmX2 pcs / 0.3mmX1 pcs
Hexagon Wrench 3mmX1 pcs / 4mmX1 pcs
|
| Optional SD Grinding Wheel for Carbide Drills |
|
GS-21 Twist Drill Re-Sharpening Machine
|
For 8mm - 22mm Twist Drill
Re-Sharpening, Angle 90 degree - 140 degree
(Optional collets and adapter for 3mm - 7mm and 23mm - 25.4mm drills)
Precise Grining Results , Precision Assurance within 0.02mm
Easy to Operate , grinding a drill within 10 seconds.
Special Design High Accuracy Alloy Steel Collets
Accurate Grinding consumption 0.2mm
High Efficiency DC motor
Stable Quality GE Diamond Dust Grinding Wheel
Considerable Design, Invisible Tool Box, Delicate & Friendly Use
Portable Design with only weight 19.8 kgs.
Specifications: |
| Drill Diameter |
Ø 8
- 22 mm |
| Point Angle |
90° - 140° |
| Grinding Wheel |
CBN#200 |
| Motor |
110 V, 50 - 60 cy, 220 V option |
| Revolutions |
3280 min |
| Net Weight |
19.8 kg (43.7 lbs.) |
| Type of Thinning |
X Thinning |
| Standard Accessories |
Collet X 15 pcs
Collet Holder X 1 Set
Metal Shim 0.1mmX2 pcs / 0.3mmX1 pcs
Hexagon Wrench 3mmX1 pcs/5mmX1 pcs
|
| Optional SD Grinding Wheel for Carbide Drills |
|
| BROWSE SOME
OF OUR DRILL AND TOOL GRINDING EQUIPMENT SELECTION HERE»»»»»»»»»»»» |
|
|
CUTTERMASTER |
|
|
|
|
